Reliable Pressure Vessel
Manufacturer
Custom pressure vessels for refrigeration, heat exchange, and industrial cooling systems.
Pressure Vessel Types
With over 20 years of manufacturing experience, we provide customized pressure vessel solutions for refrigeration, HVAC, heat exchange, and industrial cooling systems, including liquid receivers, oil separators, gas-liquid separators, and other related pressure vessels designed for stable operation, reliable performance, and safe system integration.
Dry Expansion Evaporator
Designed for low-temperature liquid storage, with a compact footprint and a simple, reliable structure.
Flooded Evaporator
High oil separation efficiency with centrifugal, impingement, and filtration design, plus electric heating for easier low-temperature start-up.
Falling Film Evaporator
Prevents liquid refrigerant from entering the compressor, with a compact structure and custom design available.
Liquid Receiver
Design pressure: 2.4MPa.
iMAt: R22. R134a. R407C. R404A, R507C. Applicable refrigerants: R22, R134a, R407C, R404A, R507C.
The product is equipped with safety valve interface, repair valve interface, high liquid level mirror and low liquid level mirror.
Low level alarm can be set up according to user's requirements.
Oil Separator
Design pressure:2.4MPa
Oil separators are designed for screw compressors and parallel refrigerators without oil separators. They can also be used for other medium and low temperature water chillers.
Oil separator is a highly efficient oil separator with centrifugal characteristics. The separator is equipped with stainless steel wire mesh mist eliminator to capture oil mist and make oil mist collide, aggregate and adsorb on the wire mesh into oil droplets.It falls into the oil collection area by gravity.
The above parameters are based on R22. The product can also be applied to R134a, R404A, R407C, R507A. The specific selection can be contacted with our company.
Gas-Liquid Separator / Suction Accumulator
1.7MPa. Design pressure: 1.7MPa.
Flow velocity in U-shaped vertical upward tube of vapor-liquid separator should be greater than 7.5m3/h, and maximum flow velocity should be less than 14 m3/h.
Applicable refrigerants: R22, R134a, R407C, R404A, R507C.
The liquid storage capacity of the vapor-liquid separator ranges from 50% to 70% of the total volume.
Standard Products Available. Custom Solutions Ready.
We provide standard shell and tube heat exchanger products, and most models can be customized based on your working conditions, medium, temperature, pressure, flow rate, installation space, connection type, and material requirements.
Customization Process
01
Submit application requirements
Share your application, equipment use, or product reference, and we help confirm the suitable solution.
02
Confirm technical parameters
Confirm cooling capacity, medium, pressure, temperature, flow rate, size, connection, and material requirements.
03
Preliminary solution design
Design the structure, size, connections, materials, and heat transfer performance based on working conditions.
04
Quotation and solution communication
Provide a fast quotation based on design, materials, and production requirements, with further optimization available.
05
Drawing confirmation
Finalize drawings, structure, dimensions, connection direction, materials, and production details.
06
Customized manufacturing
Manufacture according to confirmed drawings, including processing, assembly, welding, and inspection.
Why Choose Us
Our Advantages
High-quality shell and tube heat exchangers backed by faster delivery, reliable quality, and certified manufacturing capability.
Customized Production
Custom design based on project requirements, working conditions, and technical parameters.
Reliable Quality Assurance
Strict quality control from raw materials to finished products, with a 99.9% pass rate and a 36-month warranty.
Reliable Partnership
Professional support for product selection, material configuration, structural design, and technical evaluation.
Fast Delivery
Standard products can usually be delivered within 6–8 days.
Certified Manufacturing
Backed by 77 patents and D1/D2 certification for stronger manufacturing capability.
Responsive After-sales Service
Fast response and on-site technical support available when needed.
6-8 Days
Fast Delivery
Standard products can usually be delivered within 6–8 days.
99.9%
Pass Rate
Strict quality control from raw materials to finished products.
77
Patents Continuous innovation drives industry-leading performance.
36-Month
Warranty
Reliable product quality with long-term warranty for your peace of mind.
100+
Global Customers Trusted by customers in 30+ countries across various industries.
Production & Quality Control
From incoming inspection to in-process checking and final inspection, every production stage is strictly controlled.
01 Incoming Material Inspection
02 Tube Sheet Hole Inspection
03 Shell Inner Wall Inspection
04 Appearance & Weld Point Inspection
05 Drawing & Process Verification
06 Shell Dimension Inspection
07 Assembly Dimension Inspection
08 Final Inspection
09 Final Inspection Report
Contact Us
Need a Heat Exchanger Solution for Your Project?
Tell us your requirements and our team will help you find the right solution.